1-    Introduction to Compression Equipment – Compression Basics and Efficiency - Types of Engines – Classification of Compressors – Reciprocating Compressors – Dynamic Compressors – Applications – Selection.

2-    Compressor Prime Movers - Bearing – Seals – Shaft Alignment – Lubrication Oils – Valves

3-    Accessories: Air Inlet Filters, Separators, Dryers, Compressed Air Filters, Heat Recovery, Flow Controllers, Air Receiver, Traps and Drains

4-    Why Maintenance? - Maintenance Function - Maintenance Objectives - Trends in Maintenance-  Types of Maintenance Programs

5-    Troubleshooting for Engine Problems: Motor is not Running -  Knocks or rattles - Motor overload trips or draws excessive current

6-    Troubleshooting for Compressor Problems: Oil in discharge gas - Knocks or rattles - Gas delivery has dropped off - Relief valve vents pressure  - Moisture in frame or rusting in cylinders - Compressor runs excessively hot - Compressor does not come up to speed - Gas and/or oil leaking from shaft seal - Excessive noise when compressor is operated - Excessive lubricant consumption .

7-    TERMINOLOGY - Conclusion – Readings – Evaluation.